CREATE YOUR OWN BOOTABLE USB PEN DRIVE

♥☻Create your own BOOTABLE USB pen drive ♥♣♥

◘Windows on a STICK◘

♠♦♥☻Create your own BOOTABLE USB pen drive IN JUST FOUR STEP☻♥♣♠♦

There are a numbers of way in which to create your OWN BOOTABLE PEN DRIVE but I m going to show you the easiest Way to begin with you will CD/DVD rom drive the windows CD|DVD & a 2GB PENDRIVE if you are creating a WINDOWS XP bootable USB or A 4GB pendrive if the requirement is for WINDOWS VISTA/7.
To start with download & extracted the program “Wintoflash”. Once extracted execute the file called ”Wintoflash ”

& follows these Simple Steps:-
»>♥♣HACKER IS HERE♣♥E.s.k

◘STEP:=>1: ♦Click the windows & setup transfer wizard & select” next”.

STEP:=>2: ♦Here you will find tow define path where the “Window file path” points to location of the windows installation disk & the USB derive specific location of pan drive
that’s will be creating the bootable installation routine. Click on ‘select’ and choose an appropriate path for both.

STEP:=>3: ♦Accept the ‘Windows Lincense agreement’ and click on continue .

STEP:=>4: ♦Don,t Panic ! the “Warning is just to remind you that the pen drive will be formatted bEfore Proceesing. CLICK “ok” to proceed or cancel in case you inserted the WRONG pen drive or Want to check it.♥♣HACKER IS HERE♣♥E.s.k

◘◘That all the needs to be done to be able to crate a bootable windows installation pen drive . To be able to boot from the pendrive you will need to accecss the BIOS & change the boot priority to “Removeable Disk” If the setting are right you will be able to boot & proceed with the installation of windows.
Signed By
»>♥♣HACKER IS HERE♣♥E.s.k
»>♥♣ http://www.orkut.co.in/Main#Community?cmm=95703680♣♥E.s.k
»>♥♣

Tweet